- 3 March 2021
- Kindernay XIV
The Kindernay XIV Fatbike internal gear hub: What it is & why you want one
Is the concept of internal gear hubs a new one? No. Not even close. The original concept actually goes back to the late 1800s, starting out with 2-speed hubs, then later 3 speeds and more. Internal gear hubs have been used and are frequently being used on a large number of bikes, worldwide. Not so commonly used on high-performance fatbikes, though, due to some critical limitations. Until now, that is.
Enter the Kindernay XIV FATBIKE internal gear hub
- A massive 543% gear range, combined with a huge 160Nm torque capacity. The unique and critical ability to run 12mm thru-axles, for optimal frame stiffness and easy adaptability for various hub widths and mounting standards.
- 14 gears with perfectly even, 13.9% steps between them.
- An ingenious, separate hub shell - we call it SWAP Fatbike - that allows having multiple, easily swappable wheelsets, at a surprisingly low cost.
- All this performance, perfectly sealed against the elements, protected from impacts, and with hardly any maintenance requirements at all.
Sounds too good to be true?
Well, it isn’t, and this is how it looks like!
Unlike an external drivetrain, where the derailleur and cassette are open to the elements, the various gears of the Kindernay XIV Fatbike sit inside the hub shell, permanently lubricated, behind high-quality seals. This means that the internal gear hub on your fatbike is well protected against snow, ice, salt, rocks, tree stumps, branches, etc. - and fluffy snow will never stand a change of sticking to the gear components.
For you as a rider, this simply means fewer problems. No more broken derailleurs, no more bent derailleur hangers, and finally an end to untimely expenses from costly cassette replacements. Not only is the single drive cog of the Kindernay hub inexpensive (it costs less than $10), but with a perfect chain line and a durable construction, it also lasts a very long time. When it finally wears out, you can flip it, effectively doubling the life span.
In other words, drivetrain maintenance cost is pretty close to nil, especially when we consider that the perfect chain line of the XIV Fatbike hub also means that the chain will last much longer. As the Kindernay XIV Fatbike hub uses no external cassette, there will be zero issues with ice build-up on your bike. Even in negative double-digit temperatures, the XIV Fatbike hub avoids potential freezing hazards, due to light viscosity oil in the internal gear hub. More time spent riding, with less time spent replacing parts makes good sense for most riders.
We mentioned the 12mm thru-axle compatibility. How important is that? Pretty much any high-performance frame on the market, produced since approx. 2015, are of the 12mm thru axle type. These 12mm thru-axles vastly increase the stiffness of the frame/hub interface.
The Kindernay XIV FATBIKE is the only internal gear hub on the market that is designed to be used with a 12mm thru-axle. Pretty important stuff, then.
- Have you ever had a shifter cable or shifter housing act up after a ride in snowy conditions?
- Frayed or corroded cables negatively affecting shifting smoothness and accuracy?
- Ever broken a shifter cable at the most inconvenient time, like in the middle of nowhere, hours from the nearest bike shop?
The hydraulic shifter actuation of the Kindernay XIV makes all those issues a thing of the past.
With no need to replace worn shifter cables or housing, the shifters are not only maintenance-free, but they stay perfectly adjusted as well since the indexing happens inside the hub.
- Do you want belt drive, for maximum cleanliness, near-silent operation and even less maintenance?
The Kindernay XIV Fatbike works perfectly with the wildly popular Gates Carbon Drive system.
A Gates Carbon Drive equipped Kindernay XIV Fatbike looks like this. It is a clean setup. Both in looks and in use.
- How much torque is 160Nm?
It is more than the peak torque developed by the internal combustion motors found in many family cars! Quite a bit of torque, then.
- Want to have more than one wheelset for your fatbike?
We all know how different type tires can dramatically increase the capabilities and versatility of a fatbike. Having various tires mounted on separate wheelsets, always ready to go, without having to dismount and mount the tires every time, makes good sense.
A separate wheelset with slick tires for road use, a wheelset with studded tires for winter use, or perhaps a different size wheelset, like a fast 29er race wheelset on a 27+ trail bike, the options are almost endless. Until now, this has required an often expensive rear hub for each extra wheelset.
This is where the Kindernay SWAP FATBIKE shell comes in.
This clever, separate hubshell, allows having several wheelsets without the cost of purchasing a separate gearhub for each of them. With a standard Torx key, the Kindernay XIV Fatbike hub bolts in and out of the SWAP shell in seconds.
Another bonus of the Kindernay hub design is the fact that the wheel build is symmetric.
Symmetry is pretty much always a good thing, and particularly so for bicycle wheels.
Since there is no space-occupying cassette on the drive side of the hub, the spokes can have the same length, meaning that they will be at the same angle on both sides of the wheel.
This symmetry yields a much stronger wheel. So strong, in fact, that our 28h wheels are significantly stronger than a traditional 32h wheel, while still being lighter and more aerodynamic, thanks to the lower spoke count.
- Anything else, you might ask?
Yes, there is. The Kindernay brake rotors are custom-made. They share their mounting bolts with the SWAP shell, saving weight and space. Pretty clever.
As an added bonus, the large bolt circle means that they are stiffer and weigh less. That is a good combination. In addition, they are bigger than your standard rotors, with our 173mm rotor replacing stock 160mm rotors, and our 193mm rotor replaces 180mm rotors.
The Kindernay torque reaction mount is placed below the brake caliper, lifting it by 6.5mm. The diameter of a circle equals its radius times two. That is where the extra 13mm comes from. Bigger rotors means better brakes.
Not only that, they are pretty nice to look at as well:
- Is there any maintenance requirements to this system?
Almost none MAINTAINANCE!
It is limited to an oil change once a year (or 5000km, whatever comes first). The oil change is easily done. Quickly, and with no special tools required. That’s it for maintenance.
The Kindernay XIV FATBIKE. High performance and convenience.
share this post
25 November 2020
25 November 2020
21 January 2021
24 February 2021
“A bicycle ride around the world begins with a single pedal stroke”
Subscibe to our newsletter to get updates and news from Kindernay and to get access to special deals only available to subscribers